Low profile, premium quality, aluminum gangway; it is ultra light and aesthetic. This gangway is designed like all our products to be maintenance free. It is specially made to fit with premium quality plastic panels and matching standard colours of our docks.

* Frame also available

• Frame 3'x8' (#RL 34)
• Frame 4'x8' (#RL 35)
• Frame 5'x8' (#RL 160)
• Frame 3'x12' (#RL 88)
• Frame 4'x12' (#RL 86)
• Frame 5'x12' (#RL 159)

Premium quality aluminium gangway; it is ultra light and aesthetic. This gangway is designed like all our products to be maintenance free. It is specially made to fit with premium quality plastic panels and matching standard colours of our docks.

Candock also offers you a custom made manufacturing service if you can't find a gangway meeting your specifications. NOTE: All gangways of 16' or more should be reinforced with either handrails or a gangway reinforcement. Do not hesitate to contact us on this matter.

NOTE: All gangways of 16' or more should be reinforced with either handrails or a gangway reinforcement. Do not hesitate to contact us on this matter.

* Frame also available :

• Frame 3'x12' (#RL 36)
• Frame 4'x12' (#RL 37)
• Frame 5'x12' (#RL 175)
• Frame 3'x16' (#RL 38)
• Frame 4'x16' (#RL 39)
• Frame 5'x16' (#RL 176)
• Frame 3'x20' (#RL 40)
• Frame 4'x20' (#RL 41)
• Frame 5'x20' (#RL 177)
• Frame 3'x24' (#RL 42)
• Frame 4'x24' (#RL 43)
• Frame 5'x24' (#RL 178)
• Frame 3'x28' (#RL 44)
• Frame 4'x28' (#RL 45)
• Frame 5'x28' (#RL 179)
• Frame 3'x32' (#RL 46)
• Frame 4'x32' (#RL 47)
• Frame 5'x32' (#RL 180)

Premium quality aluminium handrail directly welded onto our gangways (not available with econo type gangways).

Premium quality aluminium handrail. It is directly bolted on our gangways to make shipping simple and economical (not available with econo type gangways). It also facilitates storage.

The reinforcement for gangways is a slip type system directly welded onto our gangways in order to increase resistance (not available with econo type gangways).

Nonslip aluminum plate fixed to our gangways assures a smooth a transition between the gangway and the Candock's installation (not available with econo type gangways). This can also facilitate access with wheelchairs.

* Available in the following widths:

• 16''x3' (#RL 51)
• 16''x4' (#RL 52)
• 16''x5' (#RL 183)

The start angle is a system allowing you to fasten a gangway to a fixed structure allowing it to follow water level variations. Available in the following widths:

* Available in the following widths:

• 3' (#RL 53)
• 4' (#RL 54)
• 5' (#RL 181)

The start angle is a system allowing you to fasten a gangway to a fixed structure allowing it to follow water level variations. Available in the following widths:

* Available in the following widths:

• Frame of 3' (#RL 111)
• Frame of 4' (#RL 134)
• Frame of 5' (#RL 184)

High resistance starting angle is a system allowing you to fasten a gangway to a fixed structure though allowing it to follow water level variations. It is designed to be used with 24' or more gangways.

* Available in the following widths :

• 3' (#RL 135)
• 4' (#RL 136)
• 5' (#RL 182)

Hinge system allows you to tie an econo type gangway directly to a Candock's installation allowing it to follow water level variations. Use a 3' gangway for a dock made of 3 cubes and a 4' gangway for a dock made of 4 cubes. Entirely made of stainless steel with a nylon pivot, this system is very resistant and noiseless.

A plastic sliding piece is to be installed under the very end of the gangway dock side to allow it to move over the dock without damaging it.

A sliding plastic piece is to be installed under the very end of the gangway dock side or under the transition plate to allow it to move over the dock without damaging it.

Plastic covered aluminum roller to be installed under the dock end of the gangway to allow it to move on the dock without damaging it.

Premium quality non-slip openwork design plastic panel for gangways.

• 1'x3' Grey (# TF 3' GRIS)
• 1'x4' Grey (# TF 4' GRIS)
• 1'x5' Grey (# TF 5' GRIS)
• 1'x3' Beige (# TF 3' BEIGE)
• 1'x4' Beige (# TF 4' BEIGE)
• 1'x5' Beige (# TF 5' BEIGE)

Ground anchorage system for gangway to be used when the ground type permits it.

The start angle is a system allowing you to fasten a gangway to a fixed structure allowing it to follow water level variations.

This product is designed to be bolted on a gangway instead of welded. Product RL 242 is required for easy installation. NOTE: This product was designed mostly for distributors.

* Also available in the following widths:

3' (#RL 233)

4' (#RL 234)

5' (#RL 235)

The start angle is a system allowing you to fasten a gangway to a fixed structure allowing it to follow water level variations.

This product is designed to be bolted on a gangway instead of welded. Product RL 242 is required for easy installation. NOTE: This product was designed mostly for distributors.

* Also available in the following widths:

3' (#RL 243)

4' (#RL 236)

5' (#RL 244)

The start angle is a system allowing you to fasten a gangway to a fixed structure allowing it to follow water level variations.

This product is designed to be bolted on a gangway instead of welded. Product RL 242 is required for easy installation. NOTE: This product was designed mostly for distributors.

* Also available in the following widths:

3' (#RL 238)

4' (#RL 237)

5' (#RL 239)

Hinge system allows you to tie an econo type gangway directly to a Candock's installation allowing it to follow water level variations. Use a 3' gangway for a dock made of 3 cubes and a 4' gangway for a dock made of 4 cubes. Entirely made of stainless steel with a nylon pivot, this system is very resistant and noiseless.

This product is designed to be bolted on a gangway instead of welded. Product RL 242 is required for easy installation. NOTE: This product was designed mostly for distributors.

Ground anchorage system for gangway to be used when the ground type permits it.

Drilling template for bolt on gangway acc.