This connecting screw is made to anchor your dock to dead weight without visible chains those being attached directly under the dock this way limiting their access to criminals. However, due to limited access, we do not recommend the use of this kind of anchorage if water level variations are superior to 2' (0,75 m).

* Also available in beige #ST 007

This stainless steel anchorage ring allows you to attach a chain from the dead weight to the dock. To be installed through an exterior lug connector. The ideal product for salted water plus it gives you the possibility to easily adjust the tension of the chains.

Wall anchorage gives you the possibility of anchoring your dock to a vertical wall. The complete system is made of stainless steel. It can swivel around to follow the wave motion. Mounted on nylon pivots, it is extremely quiet. It will take only a few seconds to unhook your dock from its anchorage point. However, since it is fixed, this system should not be used when there is a water level variation.

You can also use this product to anchor one of our docks, our Jetslide, or any another type of floating dock.

Handrail entirely made of stainless steel. Made in one piece no welding reducing risks of damage. Two different height openings giving you the possibility to attach them together. Note that this product is not to be considered as a lifeguard.

Small outboard engine aluminum bracket. Can be fixed to a platform of Candock's cubes to allow installation of a small outboard motor (10 hp max.) allowing your platform to be motor-driven.

A padded, pivoting and folding plastic seat. Can be removed no tools required.

* Also available in beige # RL 4

This is a 6' (2 m) standard diving board that has been adapted for our products. It is fixed to a cube partly filled with cement. It should be installed on the 3rd row of cubes towards the interior of the dock.

*Available in Gray RL 8

The adjusting chain is an economical type of anchorage for small installations. It gives you the opportunity to adjust your anchorage easily, so it can adapt to water level variations during the season.

Ladder entirely made of plastic. It can be folded on itself for security purposes and also to avoid seaweed build-up. This is the only ladder on the market with an upward inclined slope. It can also be installed on a conventional dock.

*Also available in beige # RT 006

The post cube has a cylindrical opening to fit a 2 7/8¨ diameter galvanized steel pipe needed to anchor your installation. This post is also covered with a 3¨ interior diameter PVC cover and a cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7' (2,25 m).

* Also available in beige # ST 003

This half post cube is used with half cubes. The half post cube has a cylindrical opening to fit a of 2 7/8¨ diameter galvanized steel pipe that will be used to anchor your installation. This post is also covered with a galvanised 3” PVC interior diameter and cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7' (2,25 m).

*Also available in gray #ST 004

Winch designed to be used mainly with the Jetslide system and must be installed on a post cube. It will help launch boats that can not use their own motor power during the process.

Candock uses a grade 30 5/16" galvanized steel chain for its anchorages.

Candock can also provide if needed disk type dead weights with a central opening to pass chains through it. Easy to handle and can be added to increase the anchorage weight.

Standard galvanized steel post used by Candock for anchorage with the post cube.

Standard galvanized steel post used by Candock with starting anchorage cubes when you have a small or medium size installation and when the bottom of the lake permits it (not fit for a rocky bottom). We recommend using 2 posts on each side when starting your installation at a 2-cube distance in between. The top of the posts should be covered with a cap for 1 11/16¨ post for safety reasons.

Safety cap to be used with 1 11/16" pipe.

PVC cover used for 2 7/8" posts when you have a post cube for anchorage in your installation.

Cap used to cover the PVC posts. Required when you have a post cube in your installation. We recommend to glue and screw it.

Light weight roof type to avoid your boat being exposed to the elements. You can install or remove it quickly. Unlike many other types of roof, Candock's canopy is designed to follow the movements of your dock thus lessening the risk of damage.

Vertical bumper designed to protect your dock as well as your boat when using any of the following: float plane, aluminum or steel boat, and aluminum pontoon.

Waterproof hatch cube offering you a storage space for various items.

* Also available in beige #CD 020

Stabilizing bar to be used with the Jetslide system in order to evenly distribute the total weight of your boat ensuring optimal floating conditions. This 117¨ (2,97 m) bar should be used with 2-cube rows on each side.

Stabilizing bar to be used with the Jetslide system in order to evenly distribute the total weight of your boat ensuring optimal floating conditions. This 155¨ (3,94 m) bar should be used with 3-cube rows on each side.

Straight line plastic slide of 7' (2,13 m) in height (yellow or blue). It is very sturdy and does not have any mobile pieces. Fast and easy installation. The surface needed to install it is: 3 cubes x 6 cubes.

* Also available in blue #CD 024

Winch to be used mainly with the Jetslide system to help launch your PWC. If needed, this winch can also be used to pull your boat on the Jetslide. It can be installed in front to pull it or on the sides for launch manoeuvres.

Bracket to fix Dock Edge or similar type of anchorage tails to the Candock's docks.

*Also available in beige RL 144

Post type hand rail, designed to be linked by ropes at two different heights.

Support that permits the insertion of a 1 11/16'' pile used to anchor a dock or jetslide by sliding the pile through the tabs of the cubes. (see picture)

Support that permits the insertion of a 1 11/16'' pile used to anchor a dock or jetslide by sliding the pile through the tabs of the cubes. Pile must be inserted into the sea bed.(see picture)

Wall anchorage gives you the possibility of anchoring your dock to a vertical wall. The complete system is made of steel covered with a high resistance cooked paint. It's recommended to use the stainless wall anchorage when used in a salty environement. It can swivel around to follow the wave motion. Mounted on nylon pivots, it is extremely quiet. It will take only a few seconds to unhook your dock from its anchorage point. However, since it is fixed, this system should not be used when there is a water level variation. You can also use this product to anchor one of our docks, our Jetslide, or any another type of floating dock.

Candock can also provide if needed disk type dead weights with a central opening to pass chains through it. Easy to handle and can be added to increase the anchorage weight.

Stainless steel bench with a plastic seat and back rest in a colour assorted to the dock.

The post cube has a cylindrical opening to fit a 2 7/8¨ diameter galvanized steel pipe needed to anchor your installation. This post is also covered with a 3¨ interior diameter PVC cover and a cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7' (2,25 m).

* Also available in beige # ST 012

This half post cube is used with half cubes. The half post cube has a cylindrical opening to fit a of 2 7/8¨ diameter galvanized steel pipe that will be used to anchor your installation. This post is also covered with a galvanised 3” PVC interior diameter and cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7' (2,25 m).

*Also available in beige #ST 016

Anchor rope equiped with an elastic core that permits adaptability to waves and tidal variations.

Also available for 1.5m/4.5ft: UC200092261.5FSC

and 2m/6ft: UC200092262FSC

Other lengths available upon request

Rods used to link the two layers of a double layer dock

Outboard engine stl bracket. Can be fixed to a platform of Candock's cubes to allow installation of an outboard engine. Allowing your platform to be motorized.

Air bag used to increase the floatation of a Jetslide boat configuration.

This connecting screw is made to anchor your dock to dead weight without visible chains those being attached directly under the dock this way limiting their access to criminals. However, due to limited access, we do not recommend the use of this kind of anchorage if water level variations are superior to 2' (0,75 m).

* Also available in beige #ST 018

Waterproof hatch cube offering you a storage space for various items.

* Also available in beige #ST 020

A padded, pivoting and folding plastic seat. can be removed no tools required.

* Also available in beige #ST 021

Plastic dock box 20'' x 30'' x 11'' or 51cm x 76cm x 28cm. The box is equiped with a Stainless lockable latch and can be fixed directly to the dock. It is ideal for storage of marine items.

Available in Beige: ST 028

Protective netting for the air assisted system. Must be used when your installation is in salt water to protect the air bag against the effect of shells that attaches themselves to any submerged equipment.