Use it to fix 2 7/8¨ poles. Faster and more efficient than the piling driver.

Key used for connecting pin installation.

Use it to put over the pole to avoid knocking it out of shape when using a sledgehammer for its installation.

Aluminum key used to fix nuts in place.

Use it over to put over the pole to avoid knocking it out of shape when using a sledgehammer for its installation.

Key for connecting pins when you use a drill to reduce assembly time. Use it only with a ½¨ drill opening, at low speed, and hold it with 2 handles.WARNING: using a drill at high speed and/or with only one handle can cause injuries. When removing a connecting pin, always loosen the pin slightly with a manual key.

Use it for ratchet wrench type of nuts. We recommend using this key if you have a large quantity of nuts to install. It is also required for the installation of Candock's ladder.

Use when removing 2 7/8¨ poles. It can be used with a car jack or an industrial one.

Wrench key used for closing steel nuts tightly. A very good solution to use between the aluminum key and ratchet type one.

Key for 2008 connecting pins when you use a drill to reduce assembly time. Use it only with a ½¨ drill opening, at low speed, and hold it with 2 handles.WARNING: using a drill at high speed and/or with only one handle can cause injuries. When removing a connecting pin, always loosen the pin slightly with a manual key.